Decolourisation of simulated reactive dyebath effluents by electrochemical oxidation assisted by UV light
Rights accessRestricted access - publisher's policy
This study is focused on the optimisation of the electrochemical decolourisation of textile effluents containing reactive dyes with the aim of making feasible—technically and economically—this method at industrial scale. Coloured waters were treated in continuous at low current density, to reduce the electrical consumption. Ti/PtOx electrodes were used to oxidize simulated dyebaths prepared with an azo/dichlorotriazine reactive dye (C.I. Reactive Orange 4). The decolourisation yield was dependent on the dyeing electrolyte (NaCl or Na2SO4). Dyeing effluents which contained from 0.5 to 20 g l−1 of NaCl reached a high decolourisation yield, depending on the current density, immediately after the electrochemical process. These results were improved when the effluents were stored for several hours under solar light. After the electrochemical treatment the effluents were stored in a tank and exposed under different lighting conditions: UV light, solar light and darkness. The evolution of the decolourisation versus the time of storage was reported and kinetic constants were calculated. The time of storage was significantly reduced by the application of UV light. A dye mineralization study was also carried out on a concentrated dyebath. A TOC removal of 81% was obtained when high current density was applied for a prolonged treatment with recirculation. This treatment required a high electrical consumption.
CitationLopez-Grimau, V.; Gutiérrez, M. Decolourisation of simulated reactive dyebath effluents by electrochemical oxidation assisted by UV light. "Chemosphere", 01 Gener 2006, vol. 62, núm. 1, p. 106-112.
|Decolourisation_simulated_reactive .pdf||185.3Kb||Restricted access|