Improving mesh generation in finite element analysis for functional morphology approaches
Visualitza/Obre
10 Marc-Nogue et al color web-.pdf (675,1Kb) (Accés restringit)
Sol·licita una còpia a l'autor
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/82900
Tipus de documentArticle
Data publicació2015
Condicions d'accésAccés restringit per política de l'editorial
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
Finite Element Analysis (FEA) is a powerful tool for functional morphology purposes. The accuracy of the final results depends on the mesh generation and the quality of the mesh. This is especially important in vertebrates as they present a complex biological structure, implying a complex geometry and, consequently, mesh generation should be performed with a consistent criterion. The aim of this paper is to discuss different ways to create a mesh of a vertebrate structure with different mesh generation methods and give recommendations on how to generate an efficient mesh without exceeding computational limits. Topics such as quality of the mesh, suitability of the mesh and reliability of the mesh are introduced to help the generation of the mesh. In this case, the use of convergence procedures assures the results of the computational solution and can be a good solution for the vertebrate models. The skull of a Chinese giant salamander (Andrias davidianus) is used as a case study.
CitacióMarcé-Nogué, J., Fortuny, J., Gil, L., Sanchez, M. Improving mesh generation in finite element analysis for functional morphology approaches. "Spanish Journal of Palaeontology", 2015, vol. 30, núm. 1, p. 117-132.
Versió de l'editorhttp://www.sepaleontologia.es/revista/anteriores/vol30_1.html
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
10 Marc-Nogue et al color web-.pdf | 675,1Kb | Accés restringit |