Surface grain size and texture after annealing ground zirconia
Visualitza/Obre
10.1016/j.jeurceramsoc.2015.12.022
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/82337
Tipus de documentArticle
Data publicació2016
EditorElsevier
Condicions d'accésAccés obert
Llevat que s'hi indiqui el contrari, els
continguts d'aquesta obra estan subjectes a la llicència de Creative Commons
:
Reconeixement-NoComercial-SenseObraDerivada 3.0 Espanya
Abstract
The surface microstructure induced after grinding and annealing 3 mol% Y2O3 stabilized tetragonal zirconia was investigated in a range of annealing temperatures between 1200 and 1600 °C. For annealing temperatures close to 1200 °C, a surface nano-grain size layer was formed, while annealing at 1600 °C induced a very high fraction of surface grains of size and yttrium content higher than the bulk. The use of TEM-EBSD observation along the surface of the specimen ground and annealed at 1200 °C also revealed the existence of a (0 1 0) preferential orientation.
CitacióRoa, J.J., Turón Viñas, M., Anglada, M. Surface grain size and texture after annealing ground zirconia. "Journal of the european ceramic society", 2016.
ISSN0955-2219
Versió de l'editorhttp://www.sciencedirect.com/science/article/pii/S0955221915302818
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
Paper_DRAC.doc | 6,383Mb | Microsoft Word | Visualitza/Obre |