Mostra el registre d'ítem simple

dc.contributorPedersen, Morten
dc.contributorVan Wunnik, Lucas
dc.contributor.authorBatlle Ginette, Sergi
dc.date.accessioned2016-01-27T19:40:46Z
dc.date.issued2014
dc.identifier.urihttp://hdl.handle.net/2117/82175
dc.description.abstractMHWirth has given the thesis of designing a new lifting yoke as a multidisciplinary project. The new yoke is required to lift more than the parallel yoke currently supplied by the company. The necessary instrumentation and hydraulic components to operate it safely and efficiently is required. A cost estimation from both disciplines on the yoke parts will be done. The project group has through a concept phase, designed a new lifting yoke approved by the company. The design is based on a design of a pallet fork. In the pre-engineering phase the group was divided into the respective disciplines. A complete mechanical design and a hydraulic system have been developed, along with a through selection of electrical components. The hydraulic system, together with the mechanical movements has been analyzed to compare the new yoke with the parallel yoke, in terms of operational efficiency. The new yoke is potentially more efficient than the parallel yoke due to the amount of pipes transported simultaneously. An analysis of the time used on mechanical movements has shown that the yoke is able to compete on an equal level of efficiency as existing equipment. The new yoke fulfills the requirements of lifting capabilities set from the company. The project group has done a cost estimation based on NOK/kg, and a supplied parts list for the electrical and hydraulic equipment on the parallel yoke. The total cost of 443 kNOK for the new yoke will act as a recommendation to continue the engineering of the yoke.
dc.language.isoeng
dc.publisherUniversitat Politècnica de Catalunya
dc.publisherHøgskolen i Telemark
dc.subjectÀrees temàtiques de la UPC::Enginyeria mecànica::Processos de fabricació mecànica::Màquines i mecanismes
dc.subject.lcshHoisting machinery -- Design and construction
dc.titleDevelopment of Multi Drilling Pipe Lift Yoke
dc.typeBachelor thesis
dc.subject.lemacMaquinària elevadora -- Projectes i construcció
dc.rights.accessRestricted access - author's decision
dc.date.lift10000-01-01
dc.audience.educationlevelGrau
dc.audience.mediatorEscola Tècnica Superior d'Enginyeria Industrial de Barcelona
dc.contributor.covenanteeHøgskolen i Telemark
 Find Full text

Fitxers d'aquest items

Imatge en miniatura

Aquest ítem apareix a les col·leccions següents

Mostra el registre d'ítem simple

Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets