The submapping method is one of the most widely used techniques to generate structured quadrilateral meshes. This method splits the geometry into pieces logically equivalent to a quadrilateral. Then, it meshes each piece keeping the mesh compatibility between them by solving an integer linear problem. The main limitation of submapping algorithms is that it can only be applied to geometries in which the angle between two consecutive edges is, approximately, an integer multiple of p=2. In addition, special procedures are required in order to apply it to multiply connected domains. This article presents two original modifications to mitigate these shortcomings. Finally, it presents several numerical examples that show the applicability of the developed algorithms.
CitationRuiz, E.; Sarrate, J. Generation of structured meshes in multiply connected surfaces using submapping. "Advances in engineering software", Febrer 2010, vol. 41, núm. 2, p. 379-387.
All rights reserved. This work is protected by the corresponding intellectual and industrial property rights. Without prejudice to any existing legal exemptions, reproduction, distribution, public communication or transformation of this work are prohibited without permission of the copyright holder. If you wish to make any use of the work not provided for in the law, please contact: email@example.com