Mostra el registre d'ítem simple
Process design optimization and risk analysis
dc.contributor.author | Medina, H |
dc.contributor.author | Arnaldos Viger, Josep |
dc.contributor.author | Casal Fàbrega, Joaquim |
dc.contributor.other | Universitat Politècnica de Catalunya. Departament d'Enginyeria Química |
dc.date.accessioned | 2010-07-01T10:39:15Z |
dc.date.available | 2010-07-01T10:39:15Z |
dc.date.created | 2009-09 |
dc.date.issued | 2009-09 |
dc.identifier.citation | Medina, H.; Arnaldos, J.; Casal, J. Process design optimization and risk analysis. "Journal of loss prevention in the process industries", Setembre 2009, vol. 22, núm. 5, p. 566-573. |
dc.identifier.issn | 0950-4230 |
dc.identifier.uri | http://hdl.handle.net/2117/7950 |
dc.description.abstract | Hazard identification and risk assessment are key aspects in process plant design. They are often applied in the final stages of the process at whatever the cost, unless financial constraints are imposed. However, a much better solution would be to introduce risk analysis earlier by including it in earlier stages of the design process, such as when the cost of a plant and the cost of any accidents that may occur are estimated. In this paper, an optimization methodology is proposed, in which both cost and risk (with a deterministic approach) are taken into account, to improve on the current situation. If a decision variable is chosen, an objective function will be established that makes it possible to analyze variations in overall costs, including the cost of the investment and the cost of accidents. This leads to an optimum situation in which costs are kept to a minimum. Of course, this optimization is subject to constraints, the greatest of which is the fact that risk must not exceed tolerated threshold levels. The procedure is explained and two examples, one involving a toxic release and the other a BLEVE/fireball, are used to illustrate it. |
dc.format.extent | 8 p. |
dc.language.iso | eng |
dc.rights | Attribution-NonCommercial-NoDerivs 3.0 Spain |
dc.rights.uri | http://creativecommons.org/licenses/by-nc-nd/3.0/es/ |
dc.subject | Àrees temàtiques de la UPC::Enginyeria química::Impacte ambiental |
dc.title | Process design optimization and risk analysis |
dc.type | Article |
dc.subject.lemac | Indústria química -- Mesures de seguretat |
dc.subject.lemac | Seguretat en el treball |
dc.subject.lemac | Substàncies perilloses -- Mesures de seguretat |
dc.subject.lemac | Avaluació del risc |
dc.contributor.group | Universitat Politècnica de Catalunya. CERTEC - Centre d'Estudis del Risc Tecnològic |
dc.identifier.doi | 10.1016/j.jlp.2009.04.007 |
dc.description.peerreviewed | Peer Reviewed |
dc.rights.access | Restricted access - publisher's policy |
local.identifier.drac | 1222128 |
dc.description.version | Postprint (published version) |
local.citation.author | Medina, H.; Arnaldos, J.; Casal, J. |
local.citation.publicationName | Journal of loss prevention in the process industries |
local.citation.volume | 22 |
local.citation.number | 5 |
local.citation.startingPage | 566 |
local.citation.endingPage | 573 |
Fitxers d'aquest items
Aquest ítem apareix a les col·leccions següents
-
Articles de revista [134]
-
Articles de revista [2.214]