Improvement of cold wire drawing process by electropulsing
Visualitza/Obre
improvement_cold_wire.pdf (474,6Kb) (Accés restringit)
Sol·licita una còpia a l'autor
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/77511
Tipus de documentText en actes de congrés
Data publicació2015
Condicions d'accésAccés restringit per política de l'editorial
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
The electroplastic effects on wire drawing process assisted with different short
time current pulses configurations are investigated experimentally. The current
pulses were induced to a specimen during the drawing process. The studied
material is the 308L stainless steel. Current densities of 185 A/mm2, frequencies
range from 140 to 350 Hz and pulse duration range from 100 to 250 μs were
used in the electrically‐assisted wire drawing process. Frequency and pulse
duration are combined to determine which electrical configuration improves the
mechanical behaviour under the electroplasticity phenomenon. The result of the
present study shows a decrease of the drawing forces during wire drawing
processes assisted under different electropulsing configurations. Moreover, a
formability enhancement was noted due to an alteration of the mechanical
behaviour caused by the electropulsing effect
CitacióSanchez Egea, Antonio J., Gonzalez-Rojas, Hernan A., Jorba, J. Improvement of cold wire drawing process by electropulsing. A: Manufacturing Engineering Society International Conference. "Book of abstracts MESIC". Barcelona: 2015.
ISBN9788460812807
Col·leccions
- Departament d'Enginyeria mecànica - Ponències/Comunicacions de congressos [480]
- TECNOFAB - Grup de Recerca en Tecnologies de Fabricació - Ponències/Comunicacions de congressos [77]
- Departament de Ciència dels Materials i Enginyeria Metal·lúrgica - Ponències/Comunicacions de congressos [283]
- PROCOMAME - Processos de Conformació de Materials Metàl·lics - Ponències/Comunicacions de congressos [80]
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
improvement_cold_wire.pdf | 474,6Kb | Accés restringit |