Mostra el registre d'ítem simple
Hot working analysis of a CuZn40Pb2 brass on the monophasic (beta) and intercritical (alpha plus beta) regions
dc.contributor.author | Suarez, L. |
dc.contributor.author | Rodríguez Calvillo, Pablo |
dc.contributor.author | Cabrera Marrero, José M. |
dc.contributor.author | Martinez Romay, A |
dc.contributor.author | Majuelos Mallorquin, D |
dc.contributor.other | Universitat Politècnica de Catalunya. Departament de Ciència dels Materials i Enginyeria Metal·lúrgica |
dc.date.accessioned | 2015-09-10T08:20:30Z |
dc.date.available | 2017-03-01T01:30:14Z |
dc.date.created | 2015-03-11 |
dc.date.issued | 2015-03-11 |
dc.identifier.citation | Suarez, L., Rodriguez-Calvillo, P., Cabrera, J., Martinez, A., Majuelos, D. Hot working analysis of a CuZn40Pb2 brass on the monophasic (beta) and intercritical (alpha plus beta) regions. "Materials science and engineering A. Structural materials properties microstructure and processing", 11 Març 2015, p. 42-50. |
dc.identifier.issn | 0921-5093 |
dc.identifier.uri | http://hdl.handle.net/2117/76728 |
dc.description.abstract | The high temperature deformation behavior of a Cu4OZn2Pb brass was studied by means of compression and tensile tests in the beta monophasic and alpha/beta biphasic regions. The ductility evaluated in terms of elongation and area reduction allowed to distinguish three regions: one 13 monophasic region (above 720 degrees C), and two alpha/beta biphasic regions, between 720 degrees C and 600 degrees C, and below 600 degrees C. The fracture appearance was evolving from a ductile type, with dimple formation, to a more brittle one with grain decohesion as the deformation temperature was decreased or the amount of 13 phase reduced.; The |
dc.format.extent | 9 p. |
dc.language.iso | eng |
dc.rights.uri | http://creativecommons.org/licenses/by-nc-nd/3.0/es/ |
dc.subject | Àrees temàtiques de la UPC::Enginyeria dels materials |
dc.subject.lcsh | Brass |
dc.subject.other | Hot working |
dc.subject.other | Constitutive equations |
dc.subject.other | Intercritical region |
dc.subject.other | Brass |
dc.subject.other | high-temperature creep |
dc.subject.other | deformation-behavior |
dc.subject.other | alloy |
dc.subject.other | dependence |
dc.subject.other | stress |
dc.subject.other | steels |
dc.subject.other | strain |
dc.subject.other | model |
dc.title | Hot working analysis of a CuZn40Pb2 brass on the monophasic (beta) and intercritical (alpha plus beta) regions |
dc.type | Article |
dc.subject.lemac | Metalls -- Aliatges |
dc.contributor.group | Universitat Politècnica de Catalunya. PROCOMAME - Processos de Conformació de Materials Metàl·lics |
dc.identifier.doi | 10.1016/j.msea.2014.12.093 |
dc.description.peerreviewed | Peer Reviewed |
dc.rights.access | Open Access |
local.identifier.drac | 15578205 |
dc.description.version | Postprint (author’s final draft) |
local.citation.author | Suarez, L.; Rodriguez-Calvillo, P.; Cabrera, J.; Martinez, A.; Majuelos, D. |
local.citation.publicationName | Materials science and engineering A. Structural materials properties microstructure and processing |
local.citation.volume | 627 |
local.citation.startingPage | 42 |
local.citation.endingPage | 50 |
Fitxers d'aquest items
Aquest ítem apareix a les col·leccions següents
-
Articles de revista [960]
-
Articles de revista [259]