Surface finish effect on the anodizing behaviour of Al-Si components obtained by sub-liquidus casting process
Visualitza/Obre
Text (768,3Kb) (Accés restringit)
Sol·licita una còpia a l'autor
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/7600
Tipus de documentText en actes de congrés
Data publicació2010
EditorSpringer
Condicions d'accésAccés restringit per política de l'editorial
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
The aim of this study was to investigate the hard decorative anodizing components of A357 aluminium
alloy, obtained in semisolid state by Sub Liquidus Casting® process, to improve its tribological properties and
corrosion resistance.
Components were heat treated in order to modify the shape and distribution of the eutectic silicon phase. The influence
of shot peening pre-treatment on anodizing process was evaluated. Surface modifications were investigated as they
might have beneficial effects on the wear and corrosion behaviour. Furthermore, the influence of surface condition on
the anodization colouring behaviour of aluminium was studied.
The microstructure and the surface finish influence on the anodic oxide film growth were studied by optical and
scanning electron microscopy. Experiments using a tribometer (ball on disc configuration) were performed in order to
evaluate the tribological properties of the material. Salt spray corrosion tests were used to study the corrosion properties
before and after the anodizing process.
CitacióMenargues, S. [et al.]. Surface finish effect on the anodizing behaviour of Al-Si components obtained by sub-liquidus casting process. A: ESAFORM Conference on Material Forming. "13th International ESAFORM Conference on Material Forming". Brescia: Springer, 2010, p. 1-4.
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
esaform1.pdf | Text | 768,3Kb | Accés restringit |