The injection of sinusoidal current to an electrical
grid is nowadays possible with the use of active power filters
(APFs).With quasi-steady-state (QSS) nonlinear controllers, these
power filters provide low grid-current-harmonic content with
simple-control analog implementation. This paper focuses on the
design of a QSS nonlinear controller for a single-phase APF.
A complete analysis based on the sliding-mode-control theory
is given. From the analysis, a set of control-design guidelines
is presented to select the gains and parameters of the control
scheme. Selected experimental results are reported to validate the
theoretical design procedure.
CitationMiret, J. [et al.]. Design of an analog quasi-steady-state nonlinear current-mode controller for single-phase active power filter. "IEEE transactions on industrial electronics", Desembre 2009, vol. 56, núm. 12, p. 4872-4881.
All rights reserved. This work is protected by the corresponding intellectual and industrial property rights. Without prejudice to any existing legal exemptions, reproduction, distribution, public communication or transformation of this work are prohibited without permission of the copyright holder. If you wish to make any use of the work not provided for in the law, please contact: firstname.lastname@example.org