Determination of non halogenated solvents in industrial wastewater using solid phase microextraction (SPME) and GC-MS
Tipus de documentArticle
Condicions d'accésAccés restringit per política de l'editorial
Solid phase microextraction (SPME) was applied to the analysis of a selected group of non halogenated solvents -all of them classified as volatile organic compounds (VOCs)- that may be present in diverse industrial wastewaters. Two different fibres (100-PDMS and 85-PA) were selected as SPME adsorbents. The extracted volatile organic compounds were analysed by high resolution gas chromatography coupled to mass spectrometry (GC-MS), following the EPA method 624. Calibration curves and method deletion limits obtained for these solvents using the two SPME fibres are reported. The 100-PDMS fibre provided better sensitivity, but the saturation was reached at a lower concentration than 85-PA fibre. The first fibre (100-PDMS) was applied to the analysis of several textile wastewaters. The method detection limits obtained with this fibre were: 0.1-0.3 μ/L for ethylbenzene m-xylene p-xylene toluene and diisobutyl ketone. In addition SPME and Headspace (HS) detection limits were compared.
CitacióLópez-Grimau, V. [et al.]. Determination of non halogenated solvents in industrial wastewater using solid phase microextraction (SPME) and GC-MS. "Latin american applied research", Gener 2006, vol. 36, núm. 1, p. 49-55.
Versió de l'editorhttp://www.laar.uns.edu.ar/indexes/artic_v3601/Vol_36_1_pp49.pdf
|Determination on non halogenated solvents.pdf||190.8Kb||Accés restringit|