Semisolid AlSiMg casting alloys are attractive alternatives for automotive and aeronautical applications. In this work the effects of heat treatments on hardness and tribological properties of A356 aluminium alloy obtained by Sub-Liquidus Casting (SLC) were studied. The optimum heat treatment conditions, in which the material presents the maximum hardening and wear resistance values, were determined. Heat treatment conditions investigated included: A356 SLC as cast, T5 and T6. Furthermore, AC-46500 and A6061/T6 were analyzed for comparison. The tribological properties of the samples were investigated by pin-on-disc tests at 5 N and 0.05 and 0.1 m·s-1 in dry conditions. The samples were studied by SEM-EDX techniques in order to determine the wear mechanisms and the determination of the products produced during the tests. The maximum hardness and the lowest dry wear rate were obtained through T6 thermal treatment condition.
CitationMenargues, S. [et al.]. The effect of heat treatment on hardness and drye wear properties of a semisolid processed aluminium alloy. A: International ESAFORM Conference on Material Forming. "The 12th International ESAFORM Conference on Material Forming". Enschede: 2009, p. 1-4.
All rights reserved. This work is protected by the corresponding intellectual and industrial property rights. Without prejudice to any existing legal exemptions, reproduction, distribution, public communication or transformation of this work are prohibited without permission of the copyright holder. If you wish to make any use of the work not provided for in the law, please contact: firstname.lastname@example.org