Bulk density determination as a simple and complementary tool in composting process control
Visualitza/Obre
Bulk density.pdf (559,7Kb) (Accés restringit)
Sol·licita una còpia a l'autor
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/6392
Tipus de documentArticle
Data publicació2010
Condicions d'accésAccés restringit per política de l'editorial
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
Ten composting facilities (CF) treating source-sorted organic fraction of municipal solid waste (OF) were
sampled to study the relationship between the bulk density and the composting process (CP) development.
Hundred and fourteen samples from different stages of the CP were considered (organic fraction,
initial mixture, final decomposition, final maturation and compost), including the reject materials coming
from the densimetric table at postprocessing. Total organic matter (TOM), moisture content (MC), wet
bulk density and dry basis (BDd) were determined. Significant differences were detected for MC, TOM
and BDd between some stages of the CP. The BDd increased along the CP while TOM decreased. Correlation
studies showed a significant negative relationship between TOM and bulk density, especially BDd,
during the CP, as a result of the biological activity. Moreover, a clear relationship was also found between
TOM and BDd in samples related to reject materials. The results indicate that bulk density could be a simple
and useful tool to evaluate the CP, in addition to the others parameters commonly used. At the same
time, BDd could be an easy way to infer TOM lost within rejects.
CitacióHuerta, O. [et al.]. Bulk density determination as a simple and complementary tool in composting process control. "Bioresource technology", 2010, vol. 101, núm. 3, p. 995-1001.
ISSN0960-8524
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
Bulk density.pdf | 559,7Kb | Accés restringit |