Enviaments recents

  • Parametric study of structured thermocline storage systems 

    Vera i Fernández, Jordi; Sanmartí Perona, Oriol; Torras Ortiz, Santiago; Pérez Segarra, Carlos David (2022)
    Text en actes de congrés
    Accés restringit per política de l'editorial
    A thermal accumulator system for concentrated solar power is modeled to perform a parametric study. The thermal accumulation system is a type of structured thermocline where there is a solid filler material with some ...
  • Optimized approach for CFD simulations of HVAC systems with grill air diffusers 

    Vera i Fernández, Jordi; Schillaci, Eugenio; Rigola Serrano, Joaquim; Oliet Casasayas, Carles (International Institute of Refrigeration, 2023)
    Text en actes de congrés
    Accés restringit per política de l'editorial
    A proper CFD simulation of air distribution within a room requires the correct representation of inlet conditions from ventilation grids. Those elements are usually characterized by blades with a certain inclination angle ...
  • DNS and RANS simulations of a coil heat exchanger immersed in a tank 

    Vera i Fernández, Jordi; Torras Ortiz, Santiago; Schillaci, Eugenio; Oliva Llena, Asensio (Begell House, 2023)
    Comunicació de congrés
    Accés restringit per política de l'editorial
    The operation of heat exchangers in a thermal system can be described by simple heat transfer equations. The heat exchange is normally defined by a global heat transfer coefficient, which takes into account internal and ...
  • Energy analysis of resilient cooling technologies in Mediterranean buildings – A case study 

    Capdevila Paramio, Roser; Garrido Soriano, Núria; Tontodonati, Enrico (International Building Performance Simulation Association (IBPSA), 2023)
    Text en actes de congrés
    Accés restringit per decisió de l'autor
    Buildings represent 40% of energy consumption and residential buildings accounted for 27% of final energy consumption in Europe. It could be even more due to the effects of climate change. The severity of weather will ...
  • Recent developments in the design of a new air-cooled, hot-water-driven H2O-LiBr absorption chiller 

    Castro González, Jesús; Oliva Llena, Asensio; Pérez Segarra, Carlos David; Oliet Casasayas, Carles (ASHRAE, 2008)
    Text en actes de congrés
    Accés restringit per política de l'editorial
    This paper explains the up-to-date stage of development of an air-cooled H2O-LiBr absorption chiller. The methodology of development is based on the systematic application of advanced numerical and experimental techniques, ...
  • Exa, zetta, yotta and beyond: on the evolution of Poisson solvers 

    Trias Miquel, Francesc Xavier; Alsalti Baldellou, Àdel; Oliva Llena, Asensio (Parallel Computational Fluid Dynamics (ParCFD), 2023)
    Text en actes de congrés
    Accés restringit per política de l'editorial
    In this work, we aim to shed light to the following research question: is the complexity of numerically solving Poisson’s equation increasing or decreasing for very large DNS and LES simulations of incompressible flows? ...
  • Low-rank corrections for increasing the arithmetic intensity of the preconditioners 

    Alsalti Baldellou, Àdel; Janna, Carlo; Álvarez Farré, Xavier; Trias Miquel, Francesc Xavier (Parallel Computational Fluid Dynamics (ParCFD), 2023)
    Text en actes de congrés
    Accés restringit per política de l'editorial
    Spatial reflection symmetries are common in many academic and industrial CFD configurations. Given a mesh with s symmetries, it is possible to transform Poisson’s equation into a set of 2^s fully-decoupled subsystems. By ...
  • Assessment of LES models for a fully developed windturbine array boundary layer 

    Folch Flórez, David; Trias Miquel, Francesc Xavier; Oliva Llena, Asensio (Begell House, 2023)
    Text en actes de congrés
    Accés restringit per acord de confidencialitat
    Direct numerical simulations of the incompressible Navier-Stokes equations at high Reynolds numbers are not yet feasible, so dynamically less complex mathematical formulations such as Large Eddy Simulation (LES) have been ...
  • Strategies for increasing the arithmetic intensity on ensemble averaged parallel-in-time simulations 

    Plana Riu, Josep; Trias Miquel, Francesc Xavier; Alsalti Baldellou, Àdel; Oliva Llena, Asensio (Parallel Computational Fluid Dynamics (ParCFD), 2023)
    Text en actes de congrés
    Accés restringit per acord de confidencialitat
    Extracting flow statistics from flow simulations requires generally long in- tegration intervals in which a good deal of the time is spent time-averaging the results. In order to avoid this, ensemble averaging can be applied ...
  • A coupled LSVOF-adaptive mesh refinement-moving mesh technique to study complex multiphase problems 

    Amani, Ahmad; Pérez Segarra, Carlos David; Oliva Llena, Asensio (Begell House, 2023)
    Comunicació de congrés
    Accés restringit per política de l'editorial
    The Piecewise-Linear-Interface-Calculation (PLIC) reconstruction algorithm in the Volume-of-Fluid (VOF) method is widely used in numerical simulations of interfacial flows across various fields. However, a significant ...
  • Unstructured Conservative Level-Set (UCLS) method for mass transfer in bubble swarms with high physical properties ratios 

    Balcázar Arciniega, Néstor; Rigola Serrano, Joaquim; Oliva Llena, Asensio (Begell House, 2024)
    Text en actes de congrés
    Accés restringit per política de l'editorial
    This work introduces a parallel Unstructured Conservative Level-Set (UCLS) method for reactive mass transfer in two-phase flows with a high-density ratio. The proposed method employs the multiple-marker approach to circumvent ...
  • Combustion and air flows simulations of an industrial kiln for sanitary ware manufacture 

    Liu, Jiannan; Ruano Pérez, Jesús; Schillaci, Eugenio; Rigola Serrano, Joaquim; Pérez Segarra, Carlos David (Begell House, 2023)
    Comunicació de congrés
    Accés restringit per política de l'editorial
    The implementation of green hydrogen as fuel in industrial kilns, such as those required in ceramic ware manufacturing processes, would be a disruptive milestone in the decarbonization process of the energyintensive industry. ...

Mostra'n més