Enviaments recents

  • Refuerzo a cortante de vigas de hormigón armado con tejidos y matrices base cemento. Análisis y comparativa 

    Escrig Pérez, Christian; Gil Espert, Lluís (Centre Internacional de Mètodes Numèrics en Enginyeria (CIMNE), 2016-06-01)
    Llibre
    Accés obert
    El principal objetivo de la presente investigación es realizar un estudio comparativo sobre la capacidad de diversos tipos de TRM actuando como refuerzo a cortante en vigas de hormigón armado de características actuales1. ...
  • TRM : preventing the mixed bending/buckling failure of masonry walls : experimental, analytical and numerical research 

    Bernat Masó, Ernest (OmniscriptumGmbH & Co.KG, 2015)
    Llibre
    Accés restringit per política de l'editorial
    The response of load-bearing brick masonry walls is characterised by the second-order bending effects due to the eccentricity of the load, the non-linear compressive response of the masonry and its almost negligible tensile ...
  • Analysis of unreinforced masonry walls under eccentric axial load 

    Bernat Masó, Ernest (Scholar's Press, 2014)
    Llibre
    Accés restringit per política de l'editorial
    Many buildings are supported by load-bearing masonry walls and maintaining them is a need. Hence, a comprehensive study of these structures is necessary as a starting point. These walls are mostly subjected to vertical ...
  • Numerical modeling of crack formation in power compaction processes 

    Hernández Ortega, Joaquín Alberto; Oliver Olivella, Xavier; Cante Terán, Juan Carlos (Universitat Politècnica de Catalunya. Centre Internacional de Mètodes Numèrics en Enginyeria (CIMNE), 2009)
    Llibre
    Accés obert
    Powder metallurgy (P/M) is an important technique of manufacturing metal parts from metal in powdered form. Traditionally, P/M processes and products have been designed and developed on the basis of practical rules and ...

Mostra'n més