CDAL - Centre de Disseny d'Aliatges Lleugers i Tractaments de Superfície: Enviaments recents
Ara es mostren els items 1-12 de 35
-
Study on the formability and texture evolution of AA6061 alloy processed by repetitive corrugation and straightening
(2021-10-28)
Article
Accés obertThe enhanced mechanical properties obtained by refining the grain size down to the ultrafine-grained (UFG) regime have attracted considerable attention in recent years. The severe plastic deformation (SPD) techniques allow ... -
Synergetic effects of Cr, Zr, Mg and Zn microalloying on microstructure and mechanical behavior of AlSi9Cu3 alloy
(2020)
Comunicació de congrés
Accés restringit per política de l'editorialThe effect of the alloy elements on the microstructure and the mechanical properties of an AlSi9Cu3 (Fe) secondary alloy is analysed. The additives involved include Zn, Mg, Cr, Zr and TiB, which were added in small amounts. ... -
Partial melting semisolid manufacturing to obtain billets for thixocasting extrusion
(2020)
Comunicació de congrés
Accés restringit per política de l'editorialCompanies that use prepared billets for thixocasting need to buy the billet depending on an external supplier or develop their own billets with expensive processes. In this investigation a prototype that measures the ... -
Formability of the 5754-aluminum alloy deformed by a modified repetitive corrugation and straightening process
(Multidisciplinary Digital Publishing Institute (MDPI), 2020-01)
Article
Accés obertSheets of 5754-aluminum alloy processed by a modified repetitive corrugation and straightening (RCS) process were tested in order to measure their formability. For this purpose, forming limit curves were derived. They ... -
Elastic asymmetry of PLA material in FDM-printed parts: considerations concerning experimental characterisation for use in numerical simulations
(MDPI AG, 2019-12-18)
Article
Accés obertThe objective of this research is to characterise the material poly lactic acid (PLA), printed by fused deposition modelling (FDM) technology, under three loading conditions—tension, compression and bending—in order to get ... -
Characterization of duplex coating system (HVOF plus PVD) on light alloy substrates
(Elsevier, 2017-05-25)
Article
Accés obertLight metals such as aluminium or magnesium alloys play an important role in many different industrial applications. However, aluminium and especially magnesium alloys show relatively poor resistance to sliding wear, low ... -
Corrosion mechanism of HVOF thermal sprayed WC-CoCr coatings in acidic chloride media
(Elsevier, 2019-08-15)
Article
Accés restringit per acord de confidencialitatHVOF thermal sprayed WC cermet coatings exhibit excellent abrasive and erosive wear resistance due to the presence of high volume fraction of WC particles bounded by a tough cobalt or cobalt-chromium alloy binder. However, ... -
Materiales avanzados para la mejora del comportamiento tribológico catenaria-pantógrafo
(2016-04-18)
Article
Accés obertEn este artículo se presenta un resumen de la situación actual de la problemática del sistema catenaria-pantógrafo, indicándose los materiales que se utilizan o plantean utilizar. Este trabajo es un compendio de lo presentado ... -
Microstructure and properties of aluminum silicon/short fibre carbon composites fabricated by semi-solid thixomixing
(2015-09-10)
Article
Accés obertA novel method was developed, based on thixotropic nature of semi-solid slurry of aluminum silicon alloy, for the effective dispersion and distribution of short carbon fibers (Csf) under intensive shear stress (t) into the ... -
Thixomixing as novel method for fabrication aluminum composite with carbon and alumina fibers
(World Academy of Science, Engineering and Technology (WASET), 2015)
Article
Accés obertThis study focuses on a novel method for dispersion and distribution of reinforcement under high intensive shear stress to produce metal composites. The polyacrylonitrile (PAN)-based short carbon fiber (Csf) and Nextel ... -
Orthogonal experimental design applied for wear characterization of aluminum/Csf metal composite fabricated by the thixomixing method
(2015-06-24)
Article
Accés obertHigh silicon content aluminum alloy (hypereutectic) possess good tribological characteristics with low coefficients of friction, when embedded with short carbon fiber (Csf), making this composite a good material choice ... -
Microstructural and tribological studies of as-sprayed and heat-treated HVOF Cr3C2-CoNiCrAlY coatings with a CoNiCrAlY bond coat
(2015-04-25)
Article
Accés obertDie wear is an important problem for manufacturers in hot-working processes, e.g. metal die casting, hot extrusion and thixoextrusion of aluminium, magnesium or steel, as well as glass and plastics processing. The dies ...