Mostra el registre d'ítem simple
Characterization of cutting parameters in the minimum quantity lubricant (MQL) machining process of a gearbox
dc.contributor.author | Travieso Rodríguez, José Antonio |
dc.contributor.author | Gómez Gras, Giovanni |
dc.contributor.author | García Vilana, Silvia |
dc.contributor.author | Mainau Noguer, Ferran |
dc.contributor.author | Jerez Mesa, Ramón |
dc.contributor.other | Universitat Politècnica de Catalunya. Departament d'Enginyeria Mecànica |
dc.contributor.other | Universitat Politècnica de Catalunya. Departament de Ciència dels Materials i Enginyeria Metal·lúrgica |
dc.date.accessioned | 2015-06-08T11:16:40Z |
dc.date.available | 2015-06-08T11:16:40Z |
dc.date.created | 2015-02-09 |
dc.date.issued | 2015-02-09 |
dc.identifier.citation | Travieso-Rodríguez, J.A. [et al.]. Characterization of cutting parameters in the minimum quantity lubricant (MQL) machining process of a gearbox. "International Journal of Manufacturing, Materials, and Mechanical Engineering", 09 Febrer 2015, vol. 5, núm. 1, p. 47-58. |
dc.identifier.issn | 2156-1680 |
dc.identifier.uri | http://hdl.handle.net/2117/28213 |
dc.description.abstract | This paper aims to find the key process parameters for machining different parts of an automobile gearbox, commissioned by a company that needs to replace with the MQL lubrication system their current machining process based on cutting fluids. It particularly focuses on the definition of appropriate cutting parameters for machining under the MQL condition through a statistical method of Design of Experiments (DOE). Using a combination of recommended parameters, significant improvements in the surface roughness of different machined parts are shown. Production costs are also reduced by decreasing expenses on lubricants and by optimizing the cycle time reached under the new cutting conditions, what would help the implementing company to increase its profits and adapt to a modern sustainability-demanding production industry. |
dc.format.extent | 12 p. |
dc.language.iso | eng |
dc.publisher | IGI Global |
dc.rights | Attribution-NonCommercial-NoDerivs 3.0 Spain |
dc.rights.uri | http://creativecommons.org/licenses/by-nc-nd/3.0/es/ |
dc.subject | Àrees temàtiques de la UPC::Enginyeria mecànica |
dc.subject.lcsh | Aluminum |
dc.subject.lcsh | Cutting |
dc.subject.lcsh | Machining |
dc.subject.other | Gearbox |
dc.subject.other | MQL |
dc.subject.other | manufacturing |
dc.subject.other | cutting parameters |
dc.subject.other | DOE |
dc.subject.other | aluminium |
dc.subject.other | Box-Behnken |
dc.title | Characterization of cutting parameters in the minimum quantity lubricant (MQL) machining process of a gearbox |
dc.type | Article |
dc.subject.lemac | Maquinària |
dc.subject.lemac | Alumini |
dc.contributor.group | Universitat Politècnica de Catalunya. TECNOFAB - Grup de Recerca en Tecnologies de Fabricació |
dc.identifier.doi | 10.4018/IJMMME |
dc.relation.publisherversion | http://www.igi-global.com/journal/international-journal-manufacturing-materials-mechanical/41020 |
dc.rights.access | Restricted access - publisher's policy |
local.identifier.drac | 15428582 |
dc.description.version | Postprint (published version) |
dc.date.lift | 10000-01-01 |
local.citation.author | Travieso-Rodríguez, J.A.; Gomez, G.; Garcia-Vilana, Silvia; Mainau, F.; Jerez, R. |
local.citation.publicationName | International Journal of Manufacturing, Materials, and Mechanical Engineering |
local.citation.volume | 5 |
local.citation.number | 1 |
local.citation.startingPage | 47 |
local.citation.endingPage | 58 |
Fitxers d'aquest items
Aquest ítem apareix a les col·leccions següents
-
Articles de revista [594]
-
Articles de revista [960]
-
Articles de revista [204]