Shear-flexural strength mechanical model for the design and assessment of reinforced concrete beams subjected to point or distributed loads
Cita com:
hdl:2117/27330
Tipus de documentArticle
Data publicació2014-12
Condicions d'accésAccés obert
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
A mechanical model recently developed for the shear strength of slender reinforced concrete beams with and without shear reinforcement is presented and extended to elements with uniformly distributed loads, specially focusing on practical design and assessment in this paper. The shear strength is considered to be the sum of the shear transferred by the concrete compression chord, along the crack, due to residual tensile and frictional stresses, by the stirrups and, if they exist, by the longitudinal reinforcement. Based on the principles of structural mechanics simple expressions have been derived separately for each shear transfer action and for their interaction at ultimate limit state. The predictions of the model have been compared to those obtained by using the EC2, MC2010 and ACI 318-08 provisions and they fit very well the available experimental results from the recently published ACI-DAfStb databases of shear tests on slender reinforced concrete beams with and without stirrups. Finally, a detailed application example has been presented, obtaining each contributing component to the shear strength and the assumed shape and position of the critical crack.
CitacióMari, A. [et al.]. Shear-flexural strength mechanical model for the design and assessment of reinforced concrete beams subjected to point or distributed loads. "Frontiers of Structural and Civil Engineering", Desembre 2014, vol. 8, núm. 4, p. 337-353.
ISSN2095-2430
Versió de l'editorhttp://link.springer.com/article/10.1007%2Fs11709-014-0081-0
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
Accepted Manuscript FSCE_With figures.pdf | Shear-flexural strength mechanical model for the design and assessment of reinforced concrete beams subjected to point or distributed loads | 2,191Mb | Visualitza/Obre |