Mostra el registre d'ítem simple

dc.contributor.authorPresas Batlló, Alexandre
dc.contributor.authorEgusquiza Estévez, Eduard
dc.contributor.authorValero Ferrando, Ma. del Carmen
dc.contributor.authorValentín Ruiz, David
dc.contributor.authorSeidel, Ulrich
dc.contributor.otherUniversitat Politècnica de Catalunya. Departament de Mecànica de Fluids
dc.date.accessioned2015-03-19T13:44:29Z
dc.date.created2014-07-01
dc.date.issued2014-07-01
dc.identifier.citationPresas, A. [et al.]. Feasibility of Using PZT Actuators to Study the Dynamic Behavior of a Rotating Disk due to Rotor-Stator Interaction. "Sensors", 01 Juliol 2014, vol. 14, núm. 7, p. 11919-11942.
dc.identifier.issn1424-8220
dc.identifier.urihttp://hdl.handle.net/2117/26853
dc.description.abstractIn this paper, PZT actuators are used to study the dynamic behavior of a rotating disk structure due to rotor-stator interaction excitation. The disk is studied with two different surrounding fluids-air and water. The study has been performed analytically and validated experimentally. For the theoretical analysis, the natural frequencies and the associated mode shapes of the rotating disk in air and water are obtained with the Kirchhoff-Love thin plate theory coupled with the interaction with the surrounding fluid. A model for the Rotor Stator Interaction that occurs in many rotating disk-like parts of turbomachinery such as compressors, hydraulic runners or alternators is presented. The dynamic behavior of the rotating disk due to this excitation is deduced. For the experimental analysis a test rig has been developed. It consists of a stainless steel disk (r = 198 mm and h = 8 mm) connected to a variable speed motor. Excitation and response are measured from the rotating system. For the rotating excitation four piezoelectric patches have been used. Calibrating the piezoelectric patches in amplitude and phase, different rotating excitation patterns are applied on the rotating disk in air and in water. Results show the feasibility of using PZT to control the response of the disk due to a rotor-stator interaction.
dc.format.extent24 p.
dc.language.isoeng
dc.rightsAttribution-NonCommercial-NoDerivs 3.0 Spain
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/3.0/es/
dc.subjectÀrees temàtiques de la UPC::Enginyeria mecànica::Mecànica
dc.subject.lcshSensors
dc.subject.otherrotating disk
dc.subject.otherPZT actuator
dc.subject.otherRSI
dc.subject.otherrotating excitation
dc.subject.otherresonance
dc.subject.otherVIBRATION RESPONSE
dc.subject.otherFEEDBACK-CONTROL
dc.subject.otherCIRCULAR PLATES
dc.subject.otherOPTIMIZATION
dc.titleFeasibility of Using PZT Actuators to Study the Dynamic Behavior of a Rotating Disk due to Rotor-Stator Interaction
dc.typeArticle
dc.subject.lemacEnginyeria mecànica
dc.contributor.groupUniversitat Politècnica de Catalunya. FLUIDS - Enginyeria de Fluids
dc.identifier.doi10.3390/s140711919
dc.rights.accessRestricted access - publisher's policy
local.identifier.drac15076403
dc.description.versionPostprint (published version)
dc.date.lift10000-01-01
local.citation.authorPresas, A.; Egusquiza, E.; Valero, M.; Valentin, D.; Seidel, U.
local.citation.publicationNameSensors
local.citation.volume14
local.citation.number7
local.citation.startingPage11919
local.citation.endingPage11942


Fitxers d'aquest items

Imatge en miniatura

Aquest ítem apareix a les col·leccions següents

Mostra el registre d'ítem simple