PublisherInstitute of Electrical and Electronics Engineers (IEEE)
Rights accessRestricted access - publisher's policy
This paper presents a new methodology to measure the electromagnetic (EM) field using RFID tags, overcoming the limitations in dynamic range arisen by the conventional excitation of RFID tags. The methodology consists in the use of two different signals when interrogating the RFID tag. The first signal is in charge of powering up and triggering the response of the RFID tag, while the second one, with lower power, performs the EM-field measurement. With this approach the dynamic range of the EM-field measurement is increased up to the sensitivity of the receiver, and additionally the non-linearities in the measured field distribution are completely removed.
CitationCapdevila, S. [et al.]. Increased dynamic range for RFID EM-field measurements. A: European Conference on Antennas and Propagation. "Proceedings of the 8th European Conference on Antennas and Propagation, EuCAP 2014". The Hague: Institute of Electrical and Electronics Engineers (IEEE), 2014, p. 166-170.
All rights reserved. This work is protected by the corresponding intellectual and industrial property rights. Without prejudice to any existing legal exemptions, reproduction, distribution, public communication or transformation of this work are prohibited without permission of the copyright holder. If you wish to make any use of the work not provided for in the law, please contact: firstname.lastname@example.org