Mostra el registre d'ítem simple

dc.contributor.authorZhu, Yufan
dc.contributor.authorZhou, H.F
dc.contributor.authorChai, X.S
dc.contributor.authorJohannes, Donna
dc.contributor.authorPope, Richard
dc.contributor.authorValls Vidal, Cristina
dc.contributor.authorRoncero Vivero, María Blanca
dc.contributor.otherUniversitat Politècnica de Catalunya. Departament d'Enginyeria Tèxtil i Paperera
dc.date.accessioned2014-04-09T11:13:24Z
dc.date.created2014-01-01
dc.date.issued2014-01-01
dc.identifier.citationZhu, Y. [et al.]. Inter-laboratory comparisons of hexenuronic acid measurements in kraft eucalyptus pulps using a UV-Vis spectroscopic method. "TAPPI journal", 01 Gener 2014, vol. 13, núm. 1, p. 57-61.
dc.identifier.issn0734-1415
dc.identifier.urihttp://hdl.handle.net/2117/22575
dc.description.abstractAn inter-laboratory comparison of a UV-Vis spectroscopic method (TAPPI T 282 om-13 “Hexeneuronic acid content of chemical pulp”) for hexeneuronic acid measurements was conducted using three eucalyptus kraft pulps. The pulp samples were produced in a laboratory at kappa numbers of approximately 14, 20, and 35. The hexeneuronic acid contents of the three pulps were approximately 55–65 μmol/g, or with a variation of approximately 15%. Five laboratories from four different countries participated in this round-robin study as part of the evaluation of the TAPPI provisional method for upgrading to a TAPPI standard method. The comparative study showed that the orders of hexeneuronic acid content from low to high among the three pulp samples produced by four laboratories were in agreement. Replicate measurements were not conducted at the laboratory that produced an inconsistent order of hexeneuronic acid among the three pulp samples compared with the other four laboratories. The differences in hexeneuronic acid contents from different laboratories were systematic and consistent; that is, some laboratories consistently produced high values of hexeneuronic acid for all three samples. The comparative data of three pulp samples concluded that the measurement repeatability (within a laboratory) was less than 3% and reproducibility (among laboratories) was less than 16%. Application: Analytical test laboratories, pulp mills, and research organizations can use the information in this paper for chemical pulp analysis
dc.format.extent5 p.
dc.language.isoeng
dc.subjectÀrees temàtiques de la UPC::Enginyeria paperera::Primeres matèries papereres::Fustes papereres
dc.subjectÀrees temàtiques de la UPC::Enginyeria paperera::Pasta paperera
dc.subject.lcshWood-pulp--Analysis
dc.subject.lcshWood-pulp--Testing
dc.subject.lcshPulp mills
dc.subject.otherCHEMICAL PULPS
dc.subject.otherDELIGNIFICATION
dc.subject.otherXYLANASES
dc.titleInter-laboratory comparisons of hexenuronic acid measurements in kraft eucalyptus pulps using a UV-Vis spectroscopic method
dc.typeArticle
dc.subject.lemacPaper -- Química
dc.subject.lemacPolpa de fusta
dc.contributor.groupUniversitat Politècnica de Catalunya. CELBIOTECH - Grup de Recerca: Enginyeria Paperera
dc.rights.accessRestricted access - publisher's policy
local.identifier.drac14003226
dc.description.versionPostprint (published version)
dc.date.lift10000-01-01
local.citation.authorZhu, Y.; Zhou, H.; Chai, X.; Johannes, D.; Pope, R.; Valls, C.; Roncero, M.
local.citation.publicationNameTAPPI journal
local.citation.volume13
local.citation.number1
local.citation.startingPage57
local.citation.endingPage61


Fitxers d'aquest items

Imatge en miniatura

Aquest ítem apareix a les col·leccions següents

Mostra el registre d'ítem simple