Cerca
Ara es mostren els items 1-10 de 13
Effect of carbides properties and microstructural characteristics on crack nucleation and propagation in cold forming tools
(2009)
Text en actes de congrés.
Accés restringit per política de l'editorial
Text en actes de congrés.
Accés restringit per política de l'editorial
Hard cutting of tailored hardened 22MnB5
(Technischen Universität Graz, 2010)
Text en actes de congrés.
Accés restringit per política de l'editorial
Text en actes de congrés.
Accés restringit per política de l'editorial
In the present work, the feasibility of creating low strength zones in flanges
of tailored hardened 22MnB5 is evaluated by means of the combining high and low
thermal conductivity tool materials. Finite Element (FE) ...
Young's modulus variation during unloading for a wide range of AHSS steel sheets
(2011)
Text en actes de congrés.
Accés restringit per política de l'editorial
Text en actes de congrés.
Accés restringit per política de l'editorial
In this paper, the variation of the Young’s modulus with plastic deformation during unloading in a tensile test with has been determined for a wide range of Dual-phase steels, covering from DP 1400 to DP 780. As a general ...
Elasticidad en materiales granulares
(2000)
Text en actes de congrés.
Accés restringit per política de l'editorial
Text en actes de congrés.
Accés restringit per política de l'editorial
En este trabajo se estudia el comportamiento elástico de compactos de polvos metálicos. Para ello, se han preparado probetas cilíndricas y se han sometido a ensayos de compresión uniaxial con ciclos de carga y descarga. ...
Study of the influence of the decrease of the apparent young’s modulus during unloading in the springback prediction
(International Deep-Drawing Research Group (IDDRG), 2008)
Text en actes de congrés.
Accés restringit per política de l'editorial
Text en actes de congrés.
Accés restringit per política de l'editorial
Fracture toughness characterization of advanced high strength steels by means of the essential work of fracture
(2008)
Text en actes de congrés.
Accés restringit per política de l'editorial
Text en actes de congrés.
Accés restringit per política de l'editorial
Fracture toughness cannot be readily measured in metal sheet because the
small thickness in which they are used (1-3 mm). In this sense the essential work of
fracture (EWF) has been successfully applied to determine ...
Simulación del proceso de generación de ultrasonidos mediante láser: detección, posicionamiento y medición de grietas o ranuras superficiales en régimen termolástico
(2010)
Text en actes de congrés.
Accés restringit per política de l'editorial
Text en actes de congrés.
Accés restringit per política de l'editorial
Effects of building condition on the tensile property of FFF Timberfill parts
(2018)
Text en actes de congrés.
Accés restringit per política de l'editorial
Text en actes de congrés.
Accés restringit per política de l'editorial
This paper presents a study of mechanical properties of Fused Deposition Modeling (FDM) rapid prototyping processed material Timberfill. In this study, four important process parameters such as layer thickness, density, ...
Simulation of hot stamping processes
(Grips' Media Gmbh, 2008)
Text en actes de congrés.
Accés restringit per política de l'editorial
Text en actes de congrés.
Accés restringit per política de l'editorial
Hot stamping is a thermo-mechanical technique that enables to give to a metallic blank the desired
geometry and properties in a single step, where deformation at high temperature, phase
transformations and heat transfer ...
Comportamiento elasto-plástico de los polvos metálicos sometidos a compresión en frío
(1996)
Text en actes de congrés.
Accés restringit per política de l'editorial
Text en actes de congrés.
Accés restringit per política de l'editorial