The use of ferrofluids in micromechanics
Visualitza/Obre
1-s2.0-S0924424799003180-main.pdf (674,9Kb) (Accés restringit)
Sol·licita una còpia a l'autor
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
10.1016/S0924-4247(99)00318-0
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/20990
Tipus de documentArticle
Data publicació2000-08-01
Condicions d'accésAccés restringit per política de l'editorial
Llevat que s'hi indiqui el contrari, els
continguts d'aquesta obra estan subjectes a la llicència de Creative Commons
:
Reconeixement-NoComercial-SenseObraDerivada 3.0 Espanya
Abstract
An introduction to ferrofluids in MEMS applications is presented. Ferrofluids are fluids with magnetic properties. By applying a magnetic field, the balance of forces within the ferrofluid is varied so that the magnetic fluid can move or apply pressure. These capabilities can be used in the field of the microsystems. In this work, we have obtained the typical values of pressure which can be expected from a ferrofluid. Using a piezoresistive pressure sensor, a pressure of 0.04 bar has been obtained.
CitacióPérez, R. [et al.]. The use of ferrofluids in micromechanics. "Sensors and actuators A. Physical", 01 Agost 2000, vol. 84, p. 176-180.
ISSN0924-4247
Versió de l'editorhttp://www.sciencedirect.com/science/article/pii/S0924424799003180
Col·leccions
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
1-s2.0-S0924424799003180-main.pdf | 674,9Kb | Accés restringit |