Multi look-up table FPGA implementation of an adaptive digital predistorter for linearizing RF power amplifiers with memory effects
Tipus de documentArticle
EditorInstitute of Electrical and Electronics Engineers (IEEE)
Condicions d'accésAccés obert
This paper presents a hardware implementation of a digital predistorter (DPD) for linearizing RF power amplifiers (PAs) for wideband applications. The proposed predistortion linearizer is based on a nonlinear auto-regressive moving average (NARMA) structure, which can be derived from the NARMA PA behavioral model and then mapped into a set of scalable lookup tables (LUTs). The linearizer takes advantage of its recursive nature to relax the LUT count needed to compensate memory effects in PAs. Experimental support is provided by the implementation of the proposed NARMA DPD in a field-programmable gate-array device to linearize a 170-W peak power PA, validating the recursive DPD NARMA structure for W-CDMA signals and flexible transmission bandwidth scenarios. To the best of the authors’ knowledge, it is the first time that a recursive structure is experimentally validated for DPD purposes. In addition to the results on PA efficiency and linearity, this paper addresses many practical implementation issues related to the use of FPGA in DPD applications, giving an original insight on actual prototyping scenarios. Finally, this study discusses the possibility of further enhancing the overall efficiency by degrading the PA operation mode, provided that DPD may be unavoidable due to the impact of memory effects.
CitacióGilabert, P. L.; Cesari, A.; Montoro, G.; Bertran, E.;Dilhac, J. M. Multi look-up table FPGA implementation of an adaptive digital predistorter for linearizing RF power amplifiers with memory effects. IEEE Transactions on Microwave Theory and Techniques, 2008, vol. 56, núm. 2, p. 372-384