Rights accessRestricted access - publisher's policy
Polylactide fibers (PLA), false-twist textured at different temperatures (135, 150 and 165º C) and draw ratios (1.30, 1.35 and 1.40) were stabilized by a continuous setting treatment at 50 m/min and 100º C using a specially designed chamber. The crystallinity and the orientation of the original textured filaments and those of the stabilized ones were measured. The effect of post setting on the dimensional stability, mechanical properties and thermomechanical behavior in accordance with the texturing conditions was studied. The relationships between crystallinity and the dimensional stability and between the orientation and both the relaxation shrinkage and the endset temperature of shrinkage were considered
CitationCayuela, D. [et al.]. Relationship between microstructure and properties of false-twist textured and stabilized polylactide. Part 1: dimensional stability, mechanical properties and thermomechanical behavior. "Textile research journal", Juny 2013, vol. 83, núm. 10, p. 1055-1064.
All rights reserved. This work is protected by the corresponding intellectual and industrial property rights. Without prejudice to any existing legal exemptions, reproduction, distribution, public communication or transformation of this work are prohibited without permission of the copyright holder. If you wish to make any use of the work not provided for in the law, please contact: email@example.com