Mostra el registre d'ítem simple

dc.contributor.authorSala Caselles, Vicenç
dc.contributor.authorSalehi Arashloo Arashloo, Ramin
dc.contributor.authorMoreno Eguilaz, Juan Manuel
dc.contributor.authorSalehifar, Mehdi
dc.contributor.authorRomeral Martínez, José Luis
dc.contributor.otherUniversitat Politècnica de Catalunya. Departament d'Enginyeria Electrònica
dc.date.accessioned2013-05-09T10:36:55Z
dc.date.created2012
dc.date.issued2012
dc.identifier.citationSala, V. [et al.]. Clamping diode caused distortion in multilevel NPC Full-Bridge audio power amplifiers. A: IEEE International Conference on Industrial Electronics. "IEEE Industrial Electronics Conference (IECON’12), Montreal, Quebec, Canada, 25-28 Oct. 2012.". Montreal, Quebec: 2012, p. 4941-4948.
dc.identifier.urihttp://hdl.handle.net/2117/19144
dc.description.abstractThis paper presents a study and analysis of the distorting effects of clamped diodes in multilevel DCI-NPC topology applied to high power and high quality audio-amplifier. The main distorting sources of error are characterized, which are due to the clamped-diodes non-idealities; and they are evaluated for typical commercial diodes values and working conditions. Through this study the distorting contribution of each non-ideality can be quantified, and the influence of the system operating parameters, such as reactive current angle and modulation index, are highlighted. Finally, it is presented the table of optimal parameters that a commercial diode should have to ensure proper operation of the amplifier under rated power and quality specification.
dc.format.extent8 p.
dc.language.isoeng
dc.subjectÀrees temàtiques de la UPC::Enginyeria electrònica::Electrònica de potència::Convertidors de corrent elèctric
dc.subject.lcshPower amplifiers
dc.subject.otherAudio-frequency amplifiers
dc.subject.otherDiodes
dc.subject.otherDistortion
dc.subject.otherModulation
dc.subject.otherPower amplifiers
dc.titleClamping diode caused distortion in multilevel NPC Full-Bridge audio power amplifiers
dc.typeConference report
dc.subject.lemacAmplificadors de potència
dc.contributor.groupUniversitat Politècnica de Catalunya. MCIA - Motion Control and Industrial Applications Research Group
dc.identifier.doi10.1109/IECON.2012.6388988
dc.description.peerreviewedPeer Reviewed
dc.rights.accessRestricted access - publisher's policy
local.identifier.drac12153173
dc.description.versionPostprint (published version)
dc.date.lift10000-01-01
local.citation.authorSala, V.; Salehi Arashloo, R.; Moreno-Eguilaz, J.M.; Salehifar, M.; Romeral, J.
local.citation.contributorIEEE International Conference on Industrial Electronics
local.citation.pubplaceMontreal, Quebec
local.citation.publicationNameIEEE Industrial Electronics Conference (IECON’12), Montreal, Quebec, Canada, 25-28 Oct. 2012.
local.citation.startingPage4941
local.citation.endingPage4948


Fitxers d'aquest items

Imatge en miniatura

Aquest ítem apareix a les col·leccions següents

Mostra el registre d'ítem simple