Rights accessRestricted access - publisher's policy
This article shows the proposal of a current-mode one-cycle control for linear-assisted DC/DC converters.
Linear-assisted DC/DC converters are structures that allow to take advantages of the two classic alternatives in the design of power supply systems: voltage linear
regulators (classic NPN topology or LDO –low dropout–) and switching DC/DC converters. The current-mode onecycle control technique is proposed in order to obtain the duty cycle of the linear-assisted converter switch. The proposed structure can provide an output with suitable load and line regulations. Thus, the paper shows the
design and simulation results of the proposed currentmode one-cycle linear-assisted converter.
CitationMartinez, H.; Grau, A.; Bolea, Y. Current-mode one-cycle control applied to linear–assisted DC/DC converters. A: IEEE International Conference on Emerging Technologies and Factory Automation. "Proceedings of the 17th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2012)". Kraków (Cracòvia): 2012.
All rights reserved. This work is protected by the corresponding intellectual and industrial property rights. Without prejudice to any existing legal exemptions, reproduction, distribution, public communication or transformation of this work are prohibited without permission of the copyright holder. If you wish to make any use of the work not provided for in the law, please contact: firstname.lastname@example.org