Rights accessRestricted access - publisher's policy
In the last few years, restrictive grid codes have arisen to ensure the performance and stability of electrical networks, which experience amassive integration of renewable energy sources and distributed generation systems that are normally connected to the grid through electronic power converters. In these codes, the injection of positive- and negative-sequence current components becomes necessary for fulfilling, among others, the low-voltage ride-through requirements during balanced and unbalanced grid faults. However, the performance of classical dq current controllers, applied to power converters, under unbalanced grid-voltage conditions is highly deficient, due to the unavoidable appearance of current oscillations. This paper analyzes the performance of the double synchronous reference frame controller and improves its structure by adding a decoupling network for estimating and compensating the undesirable current oscillations. Experimental results will demonstrate the validity of the proposed decoupled DSRF controller
CitationReyes, M. [et al.]. Enhanced decoupled double synchronous reference frame current controller for unbalanced grid-voltage conditions. "IEEE transactions on power electronics", 2012, vol. 27, núm. 9, p. 3934-3943.
All rights reserved. This work is protected by the corresponding intellectual and industrial property rights. Without prejudice to any existing legal exemptions, reproduction, distribution, public communication or transformation of this work are prohibited without permission of the copyright holder. If you wish to make any use of the work not provided for in the law, please contact: email@example.com