Rights accessRestricted access - publisher's policy
An antenna manufacturing process using metallized foams is presented. A microstrip-patch antenna, inspired by the Koch
island geometry, embedded in a rectangular cavity is built and tested. All the metallic parts of the antenna (patch, cavity, and
feeding probe) were metallized on the foam, resulting in a low-weight and low-complexity antenna structure. The results of
return loss, directivity as a function of frequency, radiation pattern for several modes, and radiation efficiency have been
compared with simulated data, resulting in very good agreement.
CitationAnguera, J. [et al.]. Metallized foams for fractal-shaped microstip antennas. "IEEE transactions on antennas and propagation", Desembre 2008, vol. 50, núm. 6, p. 20-37.
All rights reserved. This work is protected by the corresponding intellectual and industrial property rights. Without prejudice to any existing legal exemptions, reproduction, distribution, public communication or transformation of this work are prohibited without permission of the copyright holder. If you wish to make any use of the work not provided for in the law, please contact: firstname.lastname@example.org