Mostra el registre d'ítem simple

dc.contributor.authorAgirregomezkorta, A.
dc.contributor.authorMartínez Benasat, Antonio
dc.contributor.authorSánchez Soto, Miguel
dc.contributor.authorAretxaga, G.
dc.contributor.authorSarrionandia, Mariasun
dc.contributor.authorAurrekoetxea, J.
dc.contributor.otherUniversitat Politècnica de Catalunya. Departament de Ciència dels Materials i Enginyeria Metal·lúrgica
dc.date.accessioned2012-10-05T10:56:02Z
dc.date.created2011-07
dc.date.issued2011-07
dc.identifier.citationAgirregomezkorta, A. [et al.]. Impact behaviour of carbon fibre reinforced epoxy and non-isothermal cyclic butylene terephthalate composites manufactured by vacuum infusion. "Composites Part B: Engineering", Juliol 2011, vol. 43, núm. 5, p. 2249-2256.
dc.identifier.issn1359-8368
dc.identifier.urihttp://hdl.handle.net/2117/16658
dc.description.abstractCarbon fibre reinforced cyclic butylene terephthalate (CF-pCBT) composites non-isothermally processed by vacuum infusion starting from a one-component system have been successfully manufactured. Both the micro-structure and low-energy impact properties of the CF-pCBT have been investigated and compared with an epoxy system (CF-epoxy). The CF-pCBT composite presents higher solidification shrinkage than the CF-epoxy one, and its void content doubles that of the CF-epoxy. The CF-epoxy composite’s critical delamination threshold energy is slightly higher than that of the CF-pCBT, whereas the CF-pCBT composite absorbs twice as much energy before being penetrated. The lower interlaminar shear strength of the CF-pCBT composite is suggested to be the origin of its higher energy absorbing capability and less brittle behaviour.
dc.format.extent8 p.
dc.language.isoeng
dc.publisherElsevier
dc.rightsAttribution-NonCommercial-NoDerivs 3.0 Spain
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/3.0/es/
dc.subjectÀrees temàtiques de la UPC::Enginyeria dels materials
dc.subject.otherA. Polymer-matrix composites (PMCs)
dc.subject.otherB. Impact behaviour
dc.subject.otherE. Resin transfer moulding (RTM)
dc.subject.otherE. Thermoplastic resin
dc.titleImpact behaviour of carbon fibre reinforced epoxy and non-isothermal cyclic butylene terephthalate composites manufactured by vacuum infusion
dc.typeArticle
dc.subject.lemacFibres de carboni
dc.contributor.groupUniversitat Politècnica de Catalunya. POLYCOM - Polimers i compòsits: tecnologia
dc.identifier.doi10.1016/j.compositesb.2012.01.091
dc.description.peerreviewedPeer Reviewed
dc.relation.publisherversionhttp://www.sciencedirect.com/science/article/pii/S1359836812002302#
dc.rights.accessRestricted access - publisher's policy
local.identifier.drac10509860
dc.description.versionPostprint (published version)
dc.date.lift10000-01-01
local.citation.authorAgirregomezkorta, A.; Martinez, A.; Sánchez, M.; Aretxaga, G.; Sarrionandia, M.; Aurrekoetxea, J.
local.citation.publicationNameComposites Part B: Engineering
local.citation.volume43
local.citation.number5
local.citation.startingPage2249
local.citation.endingPage2256


Fitxers d'aquest items

Imatge en miniatura

Aquest ítem apareix a les col·leccions següents

Mostra el registre d'ítem simple