Evaluation of an environmentally friendly anticorrosive pigment for alkyd primer
Visualitza/Obre
evaluation.pdf (1,015Mb) (Accés restringit)
Sol·licita una còpia a l'autor
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
10.1016/j.porgcoat.2011.10.017
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/16527
Tipus de documentArticle
Data publicació2012-04
Condicions d'accésAccés restringit per política de l'editorial
Llevat que s'hi indiqui el contrari, els
continguts d'aquesta obra estan subjectes a la llicència de Creative Commons
:
Reconeixement-NoComercial-SenseObraDerivada 3.0 Espanya
Abstract
An alkyd formulation containing zinc phosphate (10 wt.%) was prepared and subsequently modified replacing the latter anticorrosive additive by a very low concentration of conducting polymer. Specifically, three modified paints, which contain polyaniline emeraldine base (undoped form), polyaniline emeraldine salt (doped form) and an eco-friendly polythiophene derivative (partially oxidized), were formulated. The properties and corrosion resistance of the four alkyd coatings have been characterized. Among the three modified paints, the one containing polythiophene shows the best adherence and the highest corrosion resistance. This has been attributed to the fact that the miscibility of the polythiophene derivative with the alkyd formulation is better than that of polyaniline. Furthermore, accelerated corrosion assays and electrochemical impedance spectroscopy measurements revealed that the corrosion resistance of the paint with polythiophene is several orders of magnitude higher than that with zinc phosphate. The polythiophene derivative has been found to induce the formation of a passivating and well-adhered layer between the coating and the surface, preventing the access of chloride anions and oxygen to the substrate.
CitacióMartí, M. [et al.]. Evaluation of an environmentally friendly anticorrosive pigment for alkyd primer. "Progress in organic coatings", Abril 2012, vol. 73, núm. 4, p. 321-329.
ISSN0300-9440
Versió de l'editorhttp://www.sciencedirect.com/science/article/pii/S0300944011003365
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
evaluation.pdf | 1,015Mb | Accés restringit |