Use of chicken feathers waste for the fabrication of composite materials
Visualitza/Obre
Carrillo, F. USE OF CHICKEN FEATHERS WASTE FOR THE FABRICATION OF.pdf (1,825Mb) (Accés restringit)
Sol·licita una còpia a l'autor
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/16355
Tipus de documentComunicació de congrés
Data publicació2012
Condicions d'accésAccés restringit per política de l'editorial
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
Chicken feathers (CFs), mainly discarded nowadays, are an alternative reinforcement to be applied in the preparation of composite materials (CMs). The effect of different sanitizing methods on the properties of both CFs and the corresponding CMs has been studied. Some characteristic parameters such as density have been found to be dependent on the treatment that CFs endure, whereas the mechanical properties of the CMs made of thermoplastics matrices (e.g. polypropylene and high density polyethylene) were only slightly affected by the treatment. The introduction of CFs decreased the tensile strength of the CMs compared with the neat polymers while other parameters (e.g. Young’s modulus) were essentially unaffected
CitacióCarrillo, F. [et al.]. Use of chicken feathers waste for the fabrication of composite materials. A: European Conference on Composite Materials. "Proceedings of the 15th European Conference on Composite Materials". Venècia: 2012, p. 1-8.
ISBN978-88-88785-33-2
Versió de l'editorhttp://cataleg.upc.edu/record=b1194200~S1*cat
Col·leccions
- SUMMLab - Sustainability Measurement and Modeling Lab - Ponències/Comunicacions de congressos [31]
- Departament d'Enginyeria Química - Ponències/Comunicacions de congressos [337]
- INTEXTER - Institut d'Investigació Tèxtil i Cooperació Industrial de Terrassa - Ponències/Comunicacions de congressos [18]
- Departament de Màquines i Motors Tèrmics - Ponències/Comunicacions de congressos [492]
- POLQUITEX - Materials Polimérics i Química Téxtil - Ponències/Comunicacions de congressos [29]
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
Carrillo, F. US ... FOR THE FABRICATION OF.pdf | 1,825Mb | Accés restringit |