Motion sensor and camera placement design for in-home wireless video monitoring systems
Visualitza/Obre
06133718.pdf (489,3Kb) (Accés restringit)
Sol·licita una còpia a l'autor
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
10.1109/GLOCOM.2011.6133718
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/16002
Tipus de documentText en actes de congrés
Data publicació2011
EditorIEEE Press. Institute of Electrical and Electronics Engineers
Condicions d'accésAccés restringit per política de l'editorial
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
Motion sensors and cameras can be used together to build in-home video monitoring systems, where the cameras are only activated when the motion sensors detect motion. This saves both bandwidth (reduced video storage and/or transmission) as well as energy (if the cameras are battery-operated). However,
motion sensors and cameras have different fields of view (FoV), and thus it is not clear that attaching motion sensors to cameras provides the most efficient system. Therefore, it is necessary to evaluate the performance of systems where the motion sensors are attached to the cameras (attached scenario) as well as where the motion sensors are detached from the cameras (detached
scenario). We consider the motion sensor and camera placement problem under these two scenarios, with an additional hybrid scenario, and we formulate optimization problems to achieve the minimum energy consumption, longest network lifetime, or lowest cost. Simulation results show the tradeoffs between
different objectives for all three scenarios.
CitacióYang, N.; Seyfettin, I.; Heinzelman, W. Motion sensor and camera placement design for in-home wireless video monitoring systems. A: IEEE Global Communications Conference. "2011 IEEE Global Telecommunications Conference - GLOBECOM". Houston: IEEE Press. Institute of Electrical and Electronics Engineers, 2011, p. 1-5.
Versió de l'editorhttp://ieeexplore.ieee.org/xpls/abs_all.jsp?arnumber=6133718&tag=1
Col·leccions
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
06133718.pdf | 489,3Kb | Accés restringit |