This paper presents a study focused on the hydro-mechanical behaviour of a plastic clay under partially saturated conditions. Clay remoulded samples were dried using vapour transfer under one-dimensional conditions. Samples underwent an important vertical shrinkage on drying, which progressed along more than one week. To study the time evolution of this phenomenon, simulation aided techniques were used to analyse the progression of suction at local scale and to determine the time required to equilibrate homogeneously the sample. In this case the fully coupled thermo-hydromechanical finite element code Code_Bright  was used to analyse this process. The simulation adequately followed the evolution of sample shrinkage measured experimentally. The determination of the suction equalisation time also agreed with the experimental information.
CitationMerchán, V.; Romero, E.; Vaunat, J. Simulation aided testing of hydro-mechanical processes on clay. A: International Conference on Experimental Mechanics. "ICEM 14: 14th International Conference on Experimental Mechanics". 2011, p. 1-8.
All rights reserved. This work is protected by the corresponding intellectual and industrial property rights. Without prejudice to any existing legal exemptions, reproduction, distribution, public communication or transformation of this work are prohibited without permission of the copyright holder. If you wish to make any use of the work not provided for in the law, please contact: firstname.lastname@example.org