The role of hardness and roughness on the wear of different CoCrMo counterfaces on UHMWPE for artificial joints
Visualitza/Obre
Cita com:
hdl:2117/15160
Tipus de documentArticle
Data publicació2011
EditorSpringer
Condicions d'accésAccés obert
Llevat que s'hi indiqui el contrari, els
continguts d'aquesta obra estan subjectes a la llicència de Creative Commons
:
Reconeixement-NoComercial-SenseObraDerivada 3.0 Espanya
Abstract
Wear tests were carried out to study the effect of the hardness and roughness with various counterface materials on UHMWPE wear behaviour. The materials used as counterfaces were based on varieties of CoCrMo: 1) forged (hand-polished) CoCrMo, 2) forged (mass-finished) CoCrMo, and 3) cast (mass-finished) CoCrMo. Additionally, two coatings were proposed: 1) a CoCrMo coating applied to the forged CoCrMo alloy by means of physical vapour deposition (PVD), and 2) a ZrO2 coating applied to the forged CoCrMo alloy by means of plasma-assisted chemical vapour deposition (PACVD). The reciprocating pin-on-flat (RPOF) device for pin-on-disk wear testing was used for this study. The worn surfaces were observed using optical, atomic force and scanning electron microscopes.
CitacióGonzález-Mora, V.A. [et al.]. The role of hardness and roughness on the wear of different CoCrMo counterfaces on UHMWPE for artificial joints. "Journal of Biomedical Science and Engineering", 2011, vol. 4, núm. 10, p. 651-656.
ISSN1423-0127
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
JBiSE20111000001_38107227.pdf | 1,072Mb | Visualitza/Obre |