Angle estimation using high frequency injection for sliding mode controlled permanent magnet synchronous machines drives
Visualitza/Obre
Guinjoan_2011 IEEE CPE_Angle estimation.pdf (529,3Kb) (Accés restringit)
Sol·licita una còpia a l'autor
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
Cita com:
hdl:2117/14726
Tipus de documentText en actes de congrés
Data publicació2011
EditorIEEE
Condicions d'accésAccés restringit per política de l'editorial
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
In this paper, high frequency injection (HF)
technique for rotor position estimation using Sliding Mode
Control (SMC) in Permanent Magnet Synchronous Machines
(PMSMs) is presented. The novelty of this paper is the fact that
the SMC is used instead of the conventional Field Oriented
Control (FOC) and therefore the injected HF test signals for
tracking the machine’ saliency (difference between Ld and Lq) is
naturally eliminated by the SMC. Such suppression is tackled
when using the SMC and the position signals are calculated to
properly estimate the permanent magnet (PM) position.
Finally, some simulation results are presented, confirming the
proper angle estimation at low speed reversal and load impact at
zero speed.
CitacióRepecho, V. [et al.]. Angle estimation using high frequency injection for sliding mode controlled permanent magnet synchronous machines drives. A: International Conference-Workshop on Compatibility and Power Electronics. "2011 7th International Conference- Workshop Compatibility and Power Electronics (CPE) : conference proceedings". Tallinn: IEEE, 2011, p. 161-166.
ISBN978-1-4244-8806-3
Versió de l'editorhttp://ieeexplore.ieee.org/xpls/abs_all.jsp?arnumber=5942225
Col·leccions
- TIEG - Terrassa Industrial Electronics Group - Ponències/Comunicacions de congressos [123]
- EPIC - Energy Processing and Integrated Circuits - Ponències/Comunicacions de congressos [380]
- ACES - Control Avançat de Sistemes d'Energia - Ponències/Comunicacions de congressos [230]
- Departament d'Enginyeria Electrònica - Ponències/Comunicacions de congressos [1.715]
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
Guinjoan_2011 IEEE CPE_Angle estimation.pdf | 529,3Kb | Accés restringit |