UV generation of a muiltifunctional hyperbranched thermal crosslinker to cure epoxy resin
Visualitza/Obre
Article (784,0Kb) (Accés restringit)
Sol·licita una còpia a l'autor
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
10.1016/j.polymer.2011.05.029
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/14509
Tipus de documentArticle
Data publicació2011-07-07
EditorElsevier
Condicions d'accésAccés restringit per política de l'editorial
Llevat que s'hi indiqui el contrari, els
continguts d'aquesta obra estan subjectes a la llicència de Creative Commons
:
Reconeixement-NoComercial-SenseObraDerivada 3.0 Espanya
Abstract
A new hyperbranched polymer (HBP) was obtained via an iterative synthetic procedure that consists of esterification and thiol-ene click reaction. This polymer was used as a latent multifunctional macroinitiator for the dual curing of a commercially available cycloaliphatic epoxy resin and this process was studied by photo-DSC and FTIR. The presence of thioether groups in the HBP structure leads, by photoirradiation, to the formation of sulfonium salts, which are thermal cationic initiating species. The materials obtained were characterized by DMTA, TGA, gel content and FESEM. By means of the last technique domains of HBP as a second phase within the epoxy matrix were observed.
CitacióFoix, D. [et al.]. UV generation of a muiltifunctional hyperbranched thermal crosslinker to cure epoxy resin. "Polymer", 07 Juliol 2011, vol. 52, núm. 15, p. 3269-3276.
ISSN0032-3861
Versió de l'editorhttp://dx.doi.org/10.1016/j.polymer.2011.05.029
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
Foix_Polymer_52_3269-3276_2011.pdf | Article | 784,0Kb | Accés restringit |