PLIO: a generic tool for real-time operational predictive optimal control of water networks
Rights accessOpen Access
This paper presents a generic tool, named PLIO, that allows to implement the real-time operational control of water networks. Control strategies are generated using predictive optimal control techniques. This tool allows the flow management in a large water supply and distribution system including reservoirs, open-flow channels for water transport, water treatment plants, pressurized water pipe networks, tanks, flow/pressure control elements and a telemetry/telecontrol system. Predictive optimal control is used to generate flow control strategies from the sources to the consumer areas to meet future demands with appropriate pressure levels, optimizing operational goals such as network safety volumes and flow control stability. PLIO allows to build the network model graphically and then to automatically generate the model equations used by the predictive optimal controller. Additionally, PLIO can work off-line (in simulation) and on-line (in real-time mode). The case study of Santiago-Chile is presented to exemplify the control results obtained using PLIO off-line (in simulation)
CitationCembrano, M. [et al.]. PLIO: a generic tool for real-time operational predictive optimal control of water networks. "Water science and technology", Juliol 2011, vol. 64, núm. 2, p. 448-459.
Aquest ítem (excepte textos i imatges no creats per l'autor) està subjecte a una llicència de Creative Commons: Attribution-NonCommercial-NoDerivs 3.0 Spain
Showing items related by title, author, creator and subject.
The effect of the choice of the control variables of the water level control of open channels: comparison of control schemes using the ASCE Test canal 2 Horvath, Klaudia; Gómez Valentín, Manuel; Rodellar Benedé, José (Institute of Electrical and Electronics Engineers (IEEE), 2013)
Restricted access - publisher's policyThe effect of the choice of the control action variables on centralized water level controllers for open channels is analyzed. Three models are compared. In the first model the control action variable is the discharge and ...
Minimizing control cost in resource-constrained control systems: from Feedback scheduling to event-driven control Lozoya, Camilo; Martí Colom, Pau; Velasco García, Manel (IEEE Press. Institute of Electrical and Electronics Engineers, 2010)
Open AccessThis paper evaluates approaches aimed at minimizing aggregated control cost of a set of controllers that concurrently execute sharing limited computing resources. The evaluation focuses on feedback scheduling and event-driven ...
Development of a CC-ACC control model for a RC28 controller by means of Classical Control techniques Benito Ferrer, Jaume (Universitat Politècnica de Catalunya, 2014-06-24)
Restricted access - author's decisionAquesta tesi és el resultat d’una estància de pràctiques a Fontys Automotive Lectoraat, en el grup de Recerca situat en el High Tech Automotive Campus (Helmond). L’objectiu principal del projecte es el redisseny y la ...