Rights accessRestricted access - publisher's policy
In this work the affects of laser characteristics on surface morphology, microstructure, microhardness and wear rates of high velocity oxygen fuel (HVOF) WC–CoCr coatings were investigated. Continuous and pulsed laser treatments were applied on the HVOF coatings using a CO2 laser of 10.6 μm wavelength. Continuous laser treatment
significantly improved homogeneity of the coatings. Pulsed laser treatment produced significantly higher discontinuities compared to continuous mode. Microhardness increased by 45% for continuous mode laser modified WC-CoCr coatings. However, wear resistance deteriorated, with a notable 40% increase in wear rate. The variations in coating properties were attributed to the re-melting and rapid quenching of the CoCr bonding matrix allowing for WC redistribution.
CitationChikarakaraa, E. [et al.]. Characterisation of laser modified WC-CoCr coatings. A: ESAFORM Conference on Material Forming. "14th International ESAFORM Conference on Material Forming". Belfast: American Institute of Physics (AIP), 2011, p. 1087-1092.
All rights reserved. This work is protected by the corresponding intellectual and industrial property rights. Without prejudice to any existing legal exemptions, reproduction, distribution, public communication or transformation of this work are prohibited without permission of the copyright holder. If you wish to make any use of the work not provided for in the law, please contact: firstname.lastname@example.org