Experimental and numerical study of the die filling stage in powder metallurgy
Visualitza/Obre
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/13970
Tipus de documentText en actes de congrés
Data publicació2005
EditorEuropean Powder Metallurgy
Condicions d'accésAccés obert
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
The aim of this work is to show the potential of the Particle Finite Element Method (PFEM) in the simulation of the powder transfer stage, in powder metallurgy industrial processes. The most innovative aspects of the work are: a) the intensive use of the particle finite element method technology to trace the motion of a representative set of particles in the solid and b) the solution of inherent problems associated with new meshing definition and data transfer during the calculation. Comparison of experimental results and numerical simulations are used to assess the performance of the method
CitacióCante, J. [et al.]. Experimental and numerical study of the die filling stage in powder metallurgy. A: European Congress and Exhibition on Powder Metallurgy. "EURO PM2005". Praga: European Powder Metallurgy, 2005, p. 339-344.
ISBN1899072-18-7
Versió de l'editorhttp://cataleg.upc.edu/record=b1273214~S1*cat
Col·leccions
- Departament de Resistència de Materials i Estructures a l'Enginyeria - Ponències/Comunicacions de congressos [340]
- (MC)2 - Grup de Mecànica Computacional en Medis Continus - Ponències/Comunicacions de congressos [192]
- Departament de Ciència dels Materials i Enginyeria Metal·lúrgica - Ponències/Comunicacions de congressos [283]
- PROCOMAME - Processos de Conformació de Materials Metàl·lics - Ponències/Comunicacions de congressos [80]
- LITEM - Laboratori per a la Innovació Tecnològica d'Estructures i Materials - Ponències/Comunicacions de congressos [33]
- Departament d'Arquitectura de Computadors - Ponències/Comunicacions de congressos [1.954]
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
2005-EUROPM-NUMERICAL.pdf | Ponència | 1,258Mb | Visualitza/Obre |