Error analysis and reduction for a simple sensor-microcontroller interface
Visualitza/Obre
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/1393
Tipus de documentArticle
Data publicació2001-12-31
EditorIEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC
Condicions d'accésAccés obert
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
Error analysis of a resistive sensor-to-microcontroller interface based on pulse-width modulation and time–ratio measurement shows that internal input and output resistances in microcontroller digital ports produce zero, gain and nonlinearity errors. The time–ratio measurement technique cancels these errors when the sensor resistance equals the reference resistor and reduces errors around that point. We propose two simple methods of reducing those errors for sensors with a wide dynamic range. Both methods use time–ratio measurements. The first method uses several reference resistors covering the sensor resistance range; the second method uses two-point calibration. The second method is more efficient and yields errors that can be smaller than 0.5 Ω for a sensor resistance from about 600 Ω to 3550 Ω.
CitacióCustodio, A; Pallàs-Areny, R.; Bragós, R. Error analysis and reduction for a simple sensor-microcontroller interface. IEEE Transactions on instrumentation and Measurement. 2001, vol 50, núm 6, p.1644-1647
ISSN0018-9456
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
CUSTODIO.pdf | 92,46Kb | Visualitza/Obre |