Rights accessRestricted access - publisher's policy
In this paper is presented a new technique to avoid the distortion generated due to mid point voltage variations on DC-Bus of Class-D Half Bridge audio amplifiers. An usual distortion source on Class-D amplifier is the Bus-Pumping effect. Bus-Pumping causes characteristic distortion and introduces attenuation on output gain. Due to this effect the amplifier efficiency decreases. By including distortion factors on the Half-Bridge amplifier model a new
Hybrid Active Control (HAC) is implemented. The HAC minimizes distortion due to mid point DC-Bus voltage variations. Simulation and experimental results confirm the theoretical approach of parameter influence on Bus-Pumping, and the effectiveness of HAC implemented control. Results show a clear reduction of generated distortion, which allows incremented audio amplifier efficiency.
CitationSala, V.; Romeral, L. Active control based on an estimator for the bus-pumping cancellation in the half-bridge class-d audio power amplifiers. A: Audio Engineering Society Convention. "127th Convention". New York: 2011, p. 1-4.
All rights reserved. This work is protected by the corresponding intellectual and industrial property rights. Without prejudice to any existing legal exemptions, reproduction, distribution, public communication or transformation of this work are prohibited without permission of the copyright holder. If you wish to make any use of the work not provided for in the law, please contact: firstname.lastname@example.org