The morphology and properties of melt-mixed polyoxymethylene/ monosilanolisobutyl-POSS composites
Visualitza/Obre
Article principal (949,3Kb) (Accés restringit)
Sol·licita una còpia a l'autor
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
Cita com:
hdl:2117/13565
Tipus de documentArticle
Data publicació2011-09
Condicions d'accésAccés restringit per política de l'editorial
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
In this study, the morphology and thermo-mechanical behavior of composites formed by a polyoxymethylene (POM)
matrix and monosilanolisobutyl polyhedral oligomeric silsesquioxane (msib-POSS) filler have been studied. The msib-
POSS molecules were added to the POM by direct melt blending at loadings between 0 and 10 wt.%. Hydrogen bonding
interactions were detected between POM and msib-POSS Si–OH groups, increasing their mutual compatibility and leading
to nanometer-size dispersion of some msib-POSS molecules. These interactions do not prevent POSS aggregation during
blending, but lead to micron-scale msib-POSS domains. The thermal decomposition temperature of the composites
remained practically constant under inert and oxidative conditions. The low temperature thermal transition (g) and glass
transition temperature (Tg) of POM were found to move to higher temperatures only when 2.5 wt.% of msib-POSS was
added, indicating that POSS is physically linked to the POM chains, restricting their motion under those conditions. Low
content (2.5 wt.%) of msib-POSS results in antiplastization, whereas higher levels of POSS lead to a decrease in the storage
modulus of the polymer. The relationships among these effects and the morphological characteristics of the systems will
be discussed herein
CitacióIllescas, S. [et al.]. The morphology and properties of melt-mixed polyoxymethylene/ monosilanolisobutyl-POSS composites. "High performance polymers", Setembre 2011, vol. 23, núm. 6, p. 457-467.
ISSN0954-0083
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
Morphologypropertiespdf.pdf | Article principal | 949,3Kb | Accés restringit |