Characterization of rigid polypropylene-based microcellular foams produced by batch foaming processes
Visualitza/Obre
Article principal (1,517Mb) (Accés restringit)
Sol·licita una còpia a l'autor
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
Cita com:
hdl:2117/13545
Tipus de documentArticle
Data publicació2011
Condicions d'accésAccés restringit per política de l'editorial
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
The properties of polypropylene (PP) foams can be
extended by controlling the cellular structure and adding
functional fillers. PP-based microcellular foams
having an interesting combination of mechanical and
transport properties were prepared by two different
batch foaming processes. The batch processes
employed were a semisolid state CO2 dissolution physical
foaming process and a chemical one based on the
dissolution of the gases generated by the thermal
decomposition of a chemical blowing agent in the molten
state. The role of the cellular structure and nanofillers
(5 wt% of organoclay and 10–20 wt% of cellulosic
fibers) on the foam properties and CO2 diffusion rate
was discussed. Foams with expansion ratios around 3
but different cell structures were prepared and studied
concerning their structural characteristics. For unfilled
foams prepared by CO2 dissolution, the microcellular
structure resulted in the highest values of the specific
storage modulus. A fraction of organically-treated
montmorillonite dispersed into the PP matrix resulted
in superior mechanical properties due to the combined
effect of a finer cell structure and inherent higher stiffness
of the silicate layers. Despite displaying an opencell
structure, foams reinforced with high contents of
cellulosic fibers showed increased specific storage
moduli with respect to the unfilled foams
CitacióVelasco J.I. [et al.]. Characterization of rigid polypropylene-based microcellular foams produced by batch foaming processes. "Polymer engineering and science", 2011, vol. 51, núm. 11, p. 2120-2128.
ISSN0032-3888
Versió de l'editorhttp://onlinelibrary.wiley.com/doi/10.1002/pen.22048/pdf
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
Characterizationofrigid.pdf | Article principal | 1,517Mb | Accés restringit |