Rights accessRestricted access - publisher's policy
This paper addresses the problem of speckle noise on single baseline polarimetric SAR interferometry (Pol-InSAR) on the basis of the multiplicative–additive speckle noise model. Considering this speckle noise model, a novel filtering technique is defined and studied in terms of simulated and experimental Pol-InSAR data. As demonstrated, the use of the multiplicative–additive speckle noise model does not lead to a corruption of the useful information but to an improvement of its estimation. The performance of the algorithm is analyzed in terms of the physical parameters retrieved from the filtered data, that in this work correspond to the forest height and the ground phase. In case of experimental data, the retrieved forest height is compared and validated against Lidar ground truth measurements.
CitationLópez, C.; Fabregas, F.; Pipia, L. Forest parameter estimation in the Pol-InSAR context employing the multiplicative–additive speckle noise model. "ISPRS journal of photogrammetry and remote sensing", Setembre 2011, vol. 66, núm. 5, p. 597-607.
All rights reserved. This work is protected by the corresponding intellectual and industrial property rights. Without prejudice to any existing legal exemptions, reproduction, distribution, public communication or transformation of this work are prohibited without permission of the copyright holder. If you wish to make any use of the work not provided for in the law, please contact: firstname.lastname@example.org