Topologies and control of a class of single inductor multiple-output converters operating in continuous conduction mode
Visualitza/Obre
Article principal (674,8Kb) (Accés restringit)
Sol·licita una còpia a l'autor
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
Cita com:
hdl:2117/13381
Tipus de documentArticle
Data publicació2011-08
Condicions d'accésAccés restringit per política de l'editorial
Llevat que s'hi indiqui el contrari, els
continguts d'aquesta obra estan subjectes a la llicència de Creative Commons
:
Reconeixement-NoComercial-SenseObraDerivada 3.0 Espanya
Abstract
In this paper, continuous conduction mode (CCM) operation of a class of single inductor multiple output dc-dc converters is proposed. The power stage combines boost and buck-boost structures loading non-inverted and inverted outputs. The control strategy is based on current mode control under an interleaving scheme, in which each output is controlled by a specific channel. These channels use different dynamic references, which are obtained from a set of proportional-integral (PI) controllers associated to the voltage outputs. The dynamical behaviour of this system is described by means of a large signal averaged model and direct simulations of the switched circuit-based model. Small signal stability analysis of the slow scale dynamics is also carried out by using the averaged model. Finally, some experimental results are provided to validate the theoretical predictions and the numerical simulations.
CitacióBenadero, L. [et al.]. Topologies and control of a class of single inductor multiple-output converters operating in continuous conduction mode. "IET power electronics", Agost 2011, vol. 4, núm. 8, p. 927-935.
ISSN1755-4535
Versió de l'editorhttp://dx.doi.org/10.1049/iet-pel.2010.0255
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
IETPE11.pdf | Article principal | 674,8Kb | Accés restringit |