Rights accessRestricted access - publisher's policy
The adoption of the Internet Protocol version 6 (IPv6) networking in IEEE 802.15.4 sensor networks, using IEEE 1451 standardization, increases the interoperability of low-power smart-sensor devices over IP networks. This paper explains the design and implementation of the IPv6 sensor network over low-power wireless personal-area networks (6LoWPANs), and it uses the IEEE 1451 standard in IEEE 802.15.4 sensor networks.
We propose the design of the 6LoWPAN physical-layer transducer electronic datasheet (PHY-TEDS) using data-type redefinition with the header compression. Each TEDS was analyzed in terms of memory size, obtaining a reduction of 48% in the PHY-TEDS and 25% in themeta-TEDS with respect to the standard definition.
Finally, the IEEE 1451 commands are encapsulated in User Datagram Protocol datagrams to establish communication from the
network capable application processor to the wireless transducer interface module in an environmental monitoring application.
CitationHiguera, J.; Polo, J. IEEE 1451 standard in 6LoWPAN sensor networks using a compact physical-layer transducer electronic datasheet. "IEEE transactions on instrumentation and measurement", Agost 2011, vol. 60, núm. 8, p. 2751-2758.
All rights reserved. This work is protected by the corresponding intellectual and industrial property rights. Without prejudice to any existing legal exemptions, reproduction, distribution, public communication or transformation of this work are prohibited without permission of the copyright holder. If you wish to make any use of the work not provided for in the law, please contact: firstname.lastname@example.org