Procedural uncertainties of Proctor compaction tests applied on MSWI bottom ash
Visualitza/Obre
Procedural uncertainties of Proctor....pdf (284,8Kb) (Accés restringit)
Sol·licita una còpia a l'autor
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
10.1016/j.jhazmat.2010.12.045
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/13236
Tipus de documentArticle
Data publicació2011-02-28
EditorElsevier
Condicions d'accésAccés restringit per política de l'editorial
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
MSWI bottom ash is a well-graded highly compactable material that can be used as a road material in unbound pavements. Achieving the compactness assumed in the design of the pavement is of primary
concern to ensure long term structural stability. Regulations on road construction in a number of EU countries rely on standard tests originally developed for natural aggregates, which may not be appropriate
to accurately assess MSWI bottom ash. This study is intended to assist in consistently assessing MSWI bottom ash compaction by means of the Proctor method. This test is routinely applied to address unbound road materials and suggests two methods. Compaction parameters show a marked procedural dependency due to the particle morphology and weak particle strength of ash. Re-compacting a single batch sample to determine Proctor curves is a common practise that turns out to overvalue optimum
moisture contents and maximum dry densities. This could result in wet-side compactions not meeting stiffness requirements. Inaccurate moisture content measurements during testing may also induce erroneous
determinations of compaction parameters. The role of a number of physical properties of MSWI bottom ash in compaction is also investigated.
CitacióIzquierdo, M.; Querol, X.; Vazquez, E. Procedural uncertainties of Proctor compaction tests applied on MSWI bottom ash. "Journal of hazardous materials", 28 Febrer 2011, vol. 186, núm. 2-3, p. 1639-1644.
ISSN0304-3894
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
Procedural uncertainties of Proctor....pdf | 284,8Kb | Accés restringit |