PublisherIEEE Press. Institute of Electrical and Electronics Engineers
Rights accessRestricted access - publisher's policy
This paper presents a sliding mode control for a
wound rotor synchronous machine acting as an isolated generator.
The standard dq model of the machine is connected to a resistive
load. A switching function is defined in order to fulfill control
objectives, and the ideal sliding dynamics is proved to be stable.
From the desired surface, the standard sliding methodology is
applied to obtain a robust and very simple controller. Numerical
simulations and experimental results validate the control law and
show good performance and a fast response to load and reference
CitationMuñoz-Aguilar, R. S. [et al.]. Sliding mode control of a stand-alone wound rotor synchronous generator. "IEEE transactions on industrial electronics", Octubre 2011, vol. 58, núm. 10, p. 4888-4897.
All rights reserved. This work is protected by the corresponding intellectual and industrial property rights. Without prejudice to any existing legal exemptions, reproduction, distribution, public communication or transformation of this work are prohibited without permission of the copyright holder. If you wish to make any use of the work not provided for in the law, please contact: firstname.lastname@example.org