Mostra el registre d'ítem simple
Influence of the electric arc furnace dust in the physical and mechanical properties of EVA-polyethylene-butene blends
dc.contributor.author | Niubó Eslava, Maria |
dc.contributor.author | Fernández Renna, Ana Inés |
dc.contributor.author | Haurie Ibarra, Laia |
dc.contributor.author | Capdevila, X.G. |
dc.contributor.author | Chimenos Ribera, Josep Maria |
dc.contributor.author | Velasco Perero, José Ignacio |
dc.contributor.other | Universitat Politècnica de Catalunya. Departament de Ciència dels Materials i Enginyeria Metal·lúrgica |
dc.contributor.other | Universitat Politècnica de Catalunya. Departament de Construccions Arquitectòniques II |
dc.date.accessioned | 2011-08-31T11:25:34Z |
dc.date.available | 2011-08-31T11:25:34Z |
dc.date.created | 2011-05-24 |
dc.date.issued | 2011-05-24 |
dc.identifier.citation | Niubo, M. [et al.]. Influence of the electric arc furnace dust in the physical and mechanical properties of EVA-polyethylene-butene blends. "Materials science and engineering A. Structural materials properties microstructure and processing", 24 Maig 2011, vol. 528, núm. 13-14, p. 4437-4444. |
dc.identifier.issn | 0921-5093 |
dc.identifier.uri | http://hdl.handle.net/2117/13144 |
dc.description.abstract | This study assesses the processing behaviour and mechanical properties of different thermoplastic polymers filled with Electric Arc Furnace Dust (EAFD). Design of Experiments (DoE) approach enabled the evaluation of the influence of each component and the interactions between them. There were prepared different composite formulations varying the content of EAFD. The mechanical properties and the melt flow index (MFI) of composites were selected as output responses and the effect of CaCO3, BaSO4 and EAFD fillers as well as different polymer matrixes were evaluated. It was observed that slight variations in the formulation yield to a broad range of response values. Polyethylene-co-vinyl acetate (EVA) concentration showed a significant effect on all responses. It was found that the presence of EAFD increased fluidity and decreased the elasticity modulus and the elongation at break. In addition, when added with barite, the presence of EAFD caused an increase of the tensile strength. |
dc.format.extent | 8 p. |
dc.language.iso | eng |
dc.subject | Àrees temàtiques de la UPC::Enginyeria dels materials::Materials plàstics i polímers |
dc.subject.lcsh | Polymers -- Properties |
dc.subject.lcsh | Electric arc furnace dust |
dc.title | Influence of the electric arc furnace dust in the physical and mechanical properties of EVA-polyethylene-butene blends |
dc.type | Article |
dc.subject.lemac | Polímers -- Propietats mecàniques |
dc.subject.lemac | Forns elèctrics |
dc.contributor.group | Universitat Politècnica de Catalunya. GICITED - Grup Interdiciplinari de Ciència i Tecnologia en l'Edificació |
dc.contributor.group | Universitat Politècnica de Catalunya. POLYCOM - Polimers i compòsits: tecnologia |
dc.identifier.doi | 10.1016/j.msea.2011.02.006 |
dc.description.peerreviewed | Peer Reviewed |
dc.rights.access | Restricted access - publisher's policy |
local.identifier.drac | 5752008 |
dc.description.version | Postprint (published version) |
local.citation.author | Niubo, M.; Fernández , A.I.; Haurie, L.; Capdevila, X.; Chimenos, J.; Velasco J.I. |
local.citation.publicationName | Materials science and engineering A. Structural materials properties microstructure and processing |
local.citation.volume | 528 |
local.citation.number | 13-14 |
local.citation.startingPage | 4437 |
local.citation.endingPage | 4444 |
Fitxers d'aquest items
Aquest ítem apareix a les col·leccions següents
-
Articles de revista [190]
-
Articles de revista [960]
-
Articles de revista [89]
-
Articles de revista [96]